BH GSO EN 15620:2023
EN 15620:2021
Bahraini Standard
Current Edition
·
Approved on
10 December 2023
Steel static storage systems - Tolerances, deformations and clearances
BH GSO EN 15620:2023 Files
No files for this standard are available in the store currently.
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
BH GSO EN 15620:2023 Scope
This document specifies tolerances, deformations and clearances that pertain to the production, assembly and erection and performance under load of pallet racking and cantilever racking. These tolerances, deformations and clearances are important in relation to the functional requirements and ensuring the proper interaction of the handling equipment used by personnel, trained and qualified as competent, in association with the specific type of racking system. The interaction conditions are also important in determining the reliability of the storage system to ensure that the chance of mechanical handling equipment impact, pallet impact or a system breakdown is acceptably low.
This document is limited to:
— single deep adjustable beam pallet racking operated with industrial trucks;
— single and double deep adjustable beam pallet racking operated with stacker cranes;
— drive-in and drive through racking systems operated with industrial trucks;
— cantilever racking systems operated with industrial trucks.
This document does not apply to specialized types of equipment such as automated trucks, miniload, satellite systems, systems involving the use of articulated trucks, trucks using intrusive stacking methods or industrial truck serviced rack-clad buildings.
This document specifically excludes the tolerances and deformation of the industrial trucks, stacker cranes and floors.
It is the responsibility of the specifier in cooperation with the client or user to ensure that the tolerances, deformations and clearances, as quoted in this document are acceptable for safe operation of the overall system considering all factors of influence and the user informed by means such as operation instructions. The specifier can carry out appropriate design/calculations to vary some of the parameters provided that an equivalent safe operation is achieved.
This document gives guidance to be used in conjunction with mechanical handling equipment and floor information.
This document gives guidance to be used in conjunction with mechanical handling equipment and floor information.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS

BH GSO 42:2015
GSO 42:2015
Bahraini Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS


GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS

BH GSO 159:2015
GSO 159:1993
Bahraini Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS


Recently Published from Mechanical Sector
GSO ISO/TR 5262:2025
ISO/TR 5262:2023
Gulf Standard
Motorcycles — Guideline for verification of total running resistance force during mode running on a chassis dynamometer


GSO ISO/IEC 80079-20-1:2025
ISO/IEC 80079-20-1:2017
Gulf Standard
Explosive atmospheres — Part 20-1: Material characteristics for gas and vapour classification — Test methods and data



GSO ISO 22915-10:2025
ISO 22915-10:2023
Gulf Standard
Industrial trucks — Verification of stability — Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices


GSO ISO 19438:2025
ISO 19438:2023
Gulf Standard
Diesel fuel and petrol filters for internal combustion engines — Filtration efficiency using particle counting and contaminant retention capacity

